Blowdown receivers
All steam boilers must be regularly blown down to reduce the concentration of suspended and dissolved solids in the boiler water. As this waste is under pressure and at extreme temperature there must be a safe means of storage and cooling (to below 43 degrees C) before discharging to general drainage. The HSE’s PM60 gives full details of safety requirements for blow down tanks.
As boiler manufacturers, Byworth apply the same exacting standards to their blowdown tank range as they do to their boilers. Designed and built to PD5500, the tanks are inspected by Lloyds register during manufacture, and are available either from stock or individually built.
The standard range of blow down receiver sizes cover boiler outputs from 250 to 16000 kgs/hour. For larger outputs, Byworth can design and manufacture vessels to suit.
Principal features:
- Designed and built to PD5500
- Fully compliant with HSE PM60
- Built to exacting standards by skilled engineers
- Compact design
- Small footprint without compromising volume
- Connections can be positioned to suit individual installations
- Hammer paint finish for indoor or outdoor use
- Easy inspection access with elliptical door
- Cooling system available
- Inlet and drain connections ready flanged
- Mating flanges supplied loose for easy connection
- Optional stainless steel vent head to handle flash steam
- Model
- Capacity
- BT0
- 44 litre
- BT1
- 178 litre
- BT2
- 325 litre
- BT3
- 503 litre
- BT4
- 889 litre
- BT5
- 1563 litre